H3C Technologies H3C SR8800 User Manual

Page 404

393

[CE1] mpls

[CE1-mpls] quit

[CE1] mpls ldp

[CE1-mpls-ldp] quit

[CE1] isis 2

[CE1-isis-2] network-entity 10.0000.0000.0000.0002.00

[CE1-isis-2] quit

[CE1] interface loopback 0

[CE1-LoopBack0] isis enable 2

[CE1-LoopBack0] quit

[CE1] interface POS2/1/1

[CE1-POS2/1/1] ip address 10.1.1.2 24

[CE1-POS2/1/1] isis enable 2

[CE1-POS2/1/1] mpls

[CE1-POS2/1/1] mpls ldp

[CE1-POS2/1/1] mpls ldp transport-address interface

[CE1-POS2/1/1] quit

After you complete the configurations, PE 3 and CE 1 can establish an LDP session and IS-IS

neighbor relationship between them.

NOTE:

The configurations for PE 4 and CE 2 are similar to those for PE 3 and CE 1. (Details not shown)

Connect the customer carrier to the provider carrier.
# Configure PE 1.

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 200:1

[PE1-vpn-instance-vpn1] vpn-target 1:1

[PE1-vpn-instance-vpn1] quit

[PE1] mpls ldp vpn-instance vpn1

[PE1-mpls-ldp-vpn-instance-vpn1] quit

[PE1] isis 2 vpn-instance vpn1

[PE1-isis-2] network-entity 10.0000.0000.0000.0003.00

[PE1-isis-2] import-route bgp allow-ibgp

[PE1-isis-2] quit

[PE1] interface pos2/1/1

[PE1-POS2/1/1] ip binding vpn-instance vpn1

[PE1-POS2/1/1] ip address 11.1.1.2 24

[PE1-POS2/1/1] isis enable 2

[PE1-POS2/1/1] mpls

[PE1-POS2/1/1] mpls ldp

[PE1-POS2/1/1] mpls ldp transport-address interface

[PE1-POS2/1/1] quit

[PE1] bgp 100

[PE1-bgp] ipv4-family vpn-instance vpn1

[PE1-bgp-vpn1] import isis 2

[PE1-bgp-vpn1] quit

[PE1-bgp] quit

This manual is related to the following products:

H3C SR6600-X H3C SR6600 H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900