H3C Technologies H3C SR8800 User Manual

Page 347

336

[CE2] interface GigabitEthernet 4/1/1

[CE2-GigabitEthernet4/1/1] ip address 10.4.1.1 255.255.255.0

[CE2-GigabitEthernet4/1/1] quit

[CE2] bgp 65420

[CE2-bgp] peer 10.4.1.2 as-number 100

[CE2-bgp] import-route direct

[CE2] quit

Configure UPE 2
# Configure basic MPLS and MPLS LDP to establish LDP LSPs.

system-view

[UPE2] interface loopback 0

[UPE2-LoopBack0] ip address 4.4.4.9 32

[UPE2-LoopBack0] quit

[UPE2] mpls lsr-id 4.4.4.9

[UPE2] mpls

[UPE2-mpls] quit

[UPE2] mpls ldp

[UPE2-mpls-ldp] quit

[UPE2] interface GigabitEthernet 4/1/1

[UPE2-GigabitEthernet4/1/1] ip address 172.2.1.1 24

[UPE2-GigabitEthernet4/1/1] mpls

[UPE2-GigabitEthernet4/1/1] mpls ldp

[UPE2-GigabitEthernet4/1/1] quit

# Configure the IGP protocol, OSPF, for example.

[UPE2] ospf

[UPE2-ospf-1] area 0

[UPE2-ospf-1-area-0.0.0.0] network 172.2.1.0 0.0.0.255

[UPE2-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0

[UPE2-ospf-1-area-0.0.0.0] quit

[UPE2-ospf-1] quit

# Configure VPN instances vpn1 and vpn2, allowing CE 3 and CE 4 to access UPE 2.

[UPE2] ip vpn-instance vpn1

[UPE2-vpn-instance-vpn1] route-distinguisher 300:1

[UPE2-vpn-instance-vpn1] vpn-target 100:1 both

[UPE2-vpn-instance-vpn1] quit

[UPE2] ip vpn-instance vpn2

[UPE2-vpn-instance-vpn2] route-distinguisher 400:2

[UPE2-vpn-instance-vpn2] vpn-target 100:2 both

[UPE2-vpn-instance-vpn2] quit

[UPE2] interface GigabitEthernet 4/1/2

[UPE2-GigabitEthernet4/1/2] ip binding vpn-instance vpn1

[UPE2-GigabitEthernet4/1/2] ip address 10.1.1.2 24

[UPE2-GigabitEthernet4/1/2] quit

[UPE2] interface GigabitEthernet 4/1/3

[UPE2-GigabitEthernet4/1/3] ip binding vpn-instance vpn2

[UPE2-GigabitEthernet4/1/3] ip address 10.3.1.2 24

[UPE2-GigabitEthernet4/1/3] quit

This manual is related to the following products:

H3C SR6600-X H3C SR6600 H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900