H3C Technologies H3C SR8800 - Manual (Page 21)

10
• RFC 5036, LDP Specification
MPLS configuration task list
Complete the following tasks to configure MPLS:
Task Remarks
Enabling the MPLS function Required
Configuring a static LSP Required
Use either the static
or dynamic LSP
configuration
method
Establishing dynamic LSPs
through LDP
Configuring MPLS LDP capability Required
Configuring Local LDP session
parameters
Optional
Configuring remote LDP session
parameters
Optional
Configuring PHP Optional
Configuring the policy for triggering
LSP establishment
Optional
Configuring the label distribution
control mode
Optional
Configuring LDP loop detection Optional
Configuring LDP MD5 authentication Optional
Configuring LDP label filtering Optional
Maintaining LDP sessions
Configuring BFD for MPLS LDP Optional
Resetting LDP sessions Optional
Managing and optimizing MPLS
forwarding
Configuring MPLS MTU Optional
Configuring TTL processing mode at
ingress
Optional
Sending back ICMP TTL exceeded
messages for MPLS TTL expired
packets
Optional
Configuring LDP GR Optional
Configuring MPLS statistics
Setting the interval for reading
statistics
Optional
Inspecting LSPs
MPLS LSP ping Optional
MPLS LSP tracert Optional
Configuring BFD for LSPs Optional
Configuring periodic LSP tracert Optional
Enabling MPLS trap Optional