H3C Technologies H3C SR8800 - Manual (Page 285)

274
Step Command Remarks
3. Configure a network entity
title.
network-entity net Not configured by default.
4. Redistribute the VPN routes.
import-route { isis [ process-id ] |
ospf [ process-id ] | rip
[ process-id ] | bgp [ allow-ibgp ] |
direct | static } [ cost cost |
cost-type { external | internal } |
[ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
Optional.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route level
in the command, the command will
redistribute routes to the level-2
routing table by default.
5. Configure a filtering policy to
filter the redistributed routes.
filter-policy { acl-number |
ip-prefix ip-prefix-name |
route-policy route-policy-name }
export [ isis process-id | ospf
process-id | rip process-id | bgp |
direct | static ]
Optional.
By default, IS-IS does not filter
redistributed routes.
6. Return to system view. quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable the IS-IS process on
the interface.
isis enable [ process-id ] Disabled by default.
NOTE:
For more information about IS-IS, see Layer 3—IP Routing Configuration Guide.
Configuring EBGP between MCE and PE
To configure EBGP between MCE and PE:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter BGP-VPN instance
view.
ipv4-family vpn-instance vpn-instance-name N/A
4. Configure the PE as the
EBGP peer. peer { group-name | ip-address } as-number
as-number
N/A
5. Redistribute the VPN
routes of the VPN site.
import-route protocol [ process-id |
all-processes ] [ med med-value |
route-policy route-policy-name ] *
By default, no route
redistribution is configured.
6. Configure a filtering
policy to filter the routes
to be advertised.
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ direct | isis
process-id | ospf process-id | rip process-id
| static ]
Optional.
By default, BGP does not filter
the routes to be advertised.
7. Configure a filtering
policy to filter the
received routes.
filter-policy { acl-number | ip-prefix
ip-prefix-name } import
Optional.
By default, BGP does not filter
the received routes.