H3C Technologies H3C SR8800 User Manual

Page 123

112

[RouterC-ospf-1] opaque-capability enable

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] mpls-te enable

[RouterC-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] quit

# Configure Router D.

[RouterD] ospf

[RouterD-ospf-1] opaque-capability enable

[RouterD-ospf-1] area 0

[RouterD-ospf-1-area-0.0.0.0] mpls-te enable

[RouterD-ospf-1-area-0.0.0.0] quit

[RouterD-ospf-1] quit

Configure MPLS TE attributes of links
# Configure maximum link bandwidth and maximum reservable bandwidth on Router A.

[RouterA] interface GigabitEthernet 3/1/1

[RouterA-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000

[RouterA-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000

[RouterA-GigabitEthernet3/1/1] quit

# Configure maximum link bandwidth and maximum reservable bandwidth on Router B.

[RouterB] interface GigabitEthernet 3/1/1

[RouterB-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000

[RouterB-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000

[RouterB-GigabitEthernet3/1/1] quit

[RouterB] interface GigabitEthernet 3/1/2

[RouterB-GigabitEthernet3/1/2] mpls te max-link-bandwidth 10000

[RouterB-GigabitEthernet3/1/2] mpls te max-reservable-bandwidth 5000

[RouterB-GigabitEthernet3/1/2] quit

# Configure maximum link bandwidth and maximum reservable bandwidth on Router C.

[RouterC] interface GigabitEthernet 3/1/1

[RouterC-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000

[RouterC-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000

[RouterC-GigabitEthernet3/1/1] quit

[RouterC] interface GigabitEthernet 3/1/2

[RouterC-GigabitEthernet3/1/2] mpls te max-link-bandwidth 10000

[RouterC-GigabitEthernet3/1/2] mpls te max-reservable-bandwidth 5000

[RouterC-GigabitEthernet3/1/2] quit

# Configure maximum link bandwidth and maximum reservable bandwidth on Router D.

[RouterD] interface GigabitEthernet 3/1/1

[RouterD-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000

[RouterD-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000

[RouterD-GigabitEthernet3/1/1] quit

Perform the display mpls te cspf tedb all command on each router to view information about links
in TEDB. Take Router A for example:

[RouterA] display mpls te cspf tedb all

Maximum Node Supported: 128 Maximum Link Supported: 256

Current Total Node Number: 4 Current Total Link Number: 6

Id MPLS LSR-Id IGP Process-Id Area Link-Count

This manual is related to the following products:

H3C SR6600-X H3C SR6600 H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900