H3C Technologies H3C SR8800 User Manual

Page 149

138

[RouterB-GigabitEthernet2/1/1] quit

# Configure Router E.

system-view

[RouterE] mpls lsr-id 5.5.5.5

[RouterE] mpls

[RouterE-mpls] mpls te

[RouterE-mpls] mpls rsvp-te

[RouterE-mpls] mpls te cspf

[RouterE-mpls] quit

[RouterE] interface GigabitEthernet 2/1/1

[RouterE-GigabitEthernet2/1/1] mpls

[RouterE-GigabitEthernet2/1/1] mpls te

[RouterE-GigabitEthernet2/1/1] mpls rsvp-te

[RouterE-GigabitEthernet2/1/1] quit

[RouterE] interface GigabitEthernet 2/1/2

[RouterE-GigabitEthernet2/1/2] mpls

[RouterE-GigabitEthernet2/1/2] mpls te

[RouterE-GigabitEthernet2/1/2] mpls rsvp-te

[RouterE-GigabitEthernet2/1/2] quit

# Configure Router C.

system-view

[RouterC] mpls lsr-id 3.3.3.3

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls rsvp-te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] quit

[RouterC] interface GigabitEthernet 2/1/1

[RouterC-GigabitEthernet2/1/1] mpls

[RouterC-GigabitEthernet2/1/1] mpls te

[RouterC-GigabitEthernet2/1/1] mpls rsvp-te

[RouterC-GigabitEthernet2/1/1] quit

Create an MPLS TE tunnel on Router B
# Configure an MPLS TE tunnel.

[RouterB] interface tunnel 3

[RouterB-Tunnel3] ip address 10.1.1.1 255.255.255.0

[RouterB-Tunnel3] tunnel-protocol mpls te

[RouterB-Tunnel3] destination 3.3.3.3

[RouterB-Tunnel3] mpls te tunnel-id 10

# Configure IGP shortcut.

[RouterB-Tunnel3] mpls te igp shortcut

[RouterB-Tunnel3] mpls te igp metric relative -1

[RouterB-Tunnel3] mpls te commit

# Enable MPLS.

[RouterB-Tunnel3] mpls

[RouterB-Tunnel3] quit

# Configure OSPF TE.

This manual is related to the following products:

H3C SR6600-X H3C SR6600 H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900