H3C Technologies H3C SR8800 User Manual
Page 115
104
Perform the display mpls te tunnel-interface command on Router A to view the detailed information
of the MPLS TE tunnel.
[RouterA] display mpls te tunnel-interface
Tunnel Name : Tunnel1
Tunnel Desc : Tunnel1 Interface
Tunnel State Desc : CR-LSP is Up
Tunnel Attributes :
LSP ID : 1.1.1.9:2
Session ID : 10
Admin State : UP Oper State : UP
Ingress LSR ID : 1.1.1.9 Egress LSR ID: 4.4.4.9
Signaling Prot : RSVP Resv Style : SE
Class Type : CT0 Tunnel BW : 2000 kbps
Reserved BW : 2000 kbps
Setup Priority : 7 Hold Priority: 7
Affinity Prop/Mask : 0x0/0x0
Explicit Path Name : atod
Tie-Breaking Policy : None
Metric Type : None
Loop Detection : Disabled
Record Route : Disabled Record Label : Disabled
FRR Flag : Disabled BackUpBW Flag: Not Supported
BackUpBW Type : - BackUpBW : -
Route Pinning : Disabled
Retry Limit : 10 Retry Interval: 2 sec
Reopt : Disabled Reopt Freq : -
Back Up Type : None
Back Up LSPID : -
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
Tunnel Group : Primary
Primary Tunnel : -
Backup Tunnel : -
Group Status : -
Oam Status : -
Perform the display mpls te cspf tedb all command on Router A to view information about links in
TEDB.
[RouterA] display mpls te cspf tedb all
Maximum Node Supported: 128 Maximum Link Supported: 256
Current Total Node Number: 2 Current Total Link Number: 2
Id MPLS LSR-Id IGP Process-Id Area Link-Count
1 1.1.1.9 OSPF 1 0 1