H3C Technologies H3C SR8800 User Manual

Page 163

Text mode
Original mode

152

If your case is neither 1) nor 2), check the The current switch command field in the output of the

display mpls te protection tunnel command. If its value is Force, a switching action with a higher
priority than the signal switching is configured. If you expect that signaling can trigger switchover

when the main tunnel recovers, you can use the mpls te protect-switch clear command to clear all

configured switching actions.

This manual is related to the following products:

H3C SR6600-X H3C SR6600 H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900