H3C Technologies H3C SR8800 - Manual (Page 137)

126
LspIndex : 4097
Tunnel ID : 0x22001
LsrType : Transit
Bypass In Use : Not Used
BypassTunnel : Tunnel Index[Tunnel5], InnerLabel[1024]
Mpls-Mtu : 1500
No : 2
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel5
Fec : 3.3.3.3/32
Nexthop : 3.2.1.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : POS2/1/1
LspIndex : 4098
Tunnel ID : 0x22002
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
Mpls-Mtu : 1500
6. Verify the FRR function
# Shut down the protected outgoing interface on PLR.
[RouterB] interface GigabitEthernet 3/1/2
[RouterB-GigabitEthernet3/1/2] shutdown
%Sep 7 08:53:34 2004 RouterB IFNET/5/UPDOWN:Line protocol on the interface
GigabitEthernet3/1/2 turns into DOWN state
# Perform the display interface tunnel 4 command on Router A to identify the state of the primary
LSP. You can find that the tunnel interface is still up.
# Perform the display mpls te tunnel-interface command on Router A to verify the configuration of
the tunnel interface.
[RouterA] display mpls te tunnel-interface
Tunnel Name : Tunnel4
Tunnel Desc : Tunnel4 Interface
Tunnel State Desc : Modifying CR-LSP is setting up
Tunnel Attributes :
LSP ID : 1.1.1.1:1
Session ID : 10
Admin State : UP Oper State : UP
Ingress LSR ID : 1.1.1.1 Egress LSR ID: 4.4.4.4
Signaling Prot : RSVP Resv Style : SE
Class Type : CT0 Tunnel BW : 0 kbps
Reserved BW : 0 kbps
Setup Priority : 7 Hold Priority: 7
Affinity Prop/Mask : 0/0
Explicit Path Name : pri-path