AMETEK Compact i/iX Series Software Manual - Manual (Page 73)

User Manual - Rev H California Instruments
Avionics Software 73
4.4.1.5 Type I DC:
Test No. Section Subject Test Limits Comment File Ref.
5.0 Normal DC Steady State
5.1 Type 1 DC Voltage 22.0 to 32.8 Volts TYPE1-51
5.5 Voltage Ripple
5.5.1 Maximum Amplitude 4.0 Volts Peak to Peak Requirement fulfilled in 5.5.2
5.5.2 Ripple Components Per Figure 7 Use B787 DC ripple window to perform
6.0 Normal DC Transients
6.1 Voltage Transients Per Figures 8A through 8E TYPE1-61
6.2 Voltage Spikes Per Figure 10 Requires Additional Equipment
6.3 Multiple Stroke Power Interrupts 450us dropouts (actual 1ms) TYPE1-63
7.0 Abnormal DC Steady State
7.1 Type 1 DC Voltage 20.5 to 35.5 Volts TYPE1-71
8.0 Abnormal DC Transients
8.1 Voltage Transients Per Figures 9A through 9D TYPE1-81
SUPP Supplementary Transient Test Requirements Tests 1-23, Table 3.3.3-3A DC1SUPP-1
SUPP Supplementary Transient Test Requirements Tests 24-46, Table 3.3.3-3A DC1SUPP-2
SUPP Supplementary Transient Test Requirements Tests 47-67, Table 3.3.3-3A DC1SUPP-3
SUPP Supplementary Transient Test Requirements Tests 1-19, Table 3.3.3-3B DC1SUPP-4