AMETEK Compact i/iX Series Software Manual - Manual (Page 66)

User Manual – Rev H California Instruments
66 Avionics Software
4.0 Abnormal AC Transients
4.1 Voltage Transients Per Figure 5A Apply each transient 3x with 10s interval LVAC-41
4.2 Frequency Variations
4.2.1 Maximum Ramp Rate 120Hz/s up, 400Hz/s down 3 times each, 360Hz nominal LVAC-42-1
4.2.2 Frequency Transients 350 to 885 Hz 3 times each, 400Hz nominal LVAC-42-2
4.3 DC Content +/- 55VDC offset 800Hz and 360Hz LVAC-43
SUPP Supplementary Transient Test Requirements Tests 1-7, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-1
SUPP Supplementary Transient Test Requirements Tests 8-14, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-2
SUPP Supplementary Transient Test Requirements Tests 15-20, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-3
SUPP Supplementary Transient Test Requirements Tests 21-27, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-4
SUPP Supplementary Transient Test Requirements Tests 28-34, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-5
SUPP Supplementary Transient Test Requirements Tests 35-40, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-6
SUPP Supplementary Transient Test Requirements Tests 41-47, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-7
SUPP Supplementary Transient Test Requirements Tests 48-53, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-8
SUPP Supplementary Transient Test Requirements Tests 54-62, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-9
SUPP Supplementary Transient Test Requirements Tests 63-74, Table 3.3.2-3A Tests performed at 360, 680, and 800 Hz LSUPP-10
SUPP Supplementary Transient Test Requirements Tests 1-6 Table 3.3.2-3B Tests performed at 360, 680, and 800 Hz LSUPP-11
SUPP Supplementary Transient Test Requirements Tests 7-12 Table 3.3.2-3B Tests performed at 360, 680, and 800 Hz LSUPP-12
SUPP Supplementary Transient Test Requirements Tests 13-18 Table 3.3.2-3B Tests performed at 360, 680, and 800 Hz LSUPP-13
SUPP Supplementary Transient Test Requirements Test 19 Table 3.3.2-3B Tests performed at 360, 680, and 800 Hz LSUPP-14