AMETEK Compact i/iX Series Software Manual - Manual (Page 120)

User Manual – Rev H California Instruments
120 Avionics Software
5.3.5 Rev B:
5.3.5.1 Table SAC:
Test No. Section Subject Test Limits Comment File Ref.
SAC101 Load and Current Harmonic Measurements 115V RMS, 400 Hz BSAC101
SAC102 Steady State Limits for Voltage and Frequency
1 Regular Test 108V to 118V RMS, 395 to 405 Hz Apply for 30 mins each test BSAC102-1
2 Helicopter Test 108V to 118V RMS, 380 to 420 Hz Apply for 30 mins each test BSAC102-2
SAC103 No Test, Done so test numbers coincide
SAC104 Voltage Modulation
1 115V Nominal Test 115V RMS, 2.5V RMS mod Apply for 10+ mins BSAC104-1
2 109V Nominal Test 109V RMS, 2.5V RMS mod Apply for 10+ mins BSAC104-2
3 117V Nominal Test 117V RMS, 2.5V RMS mod Apply for 10+ mins BSAC104-3
SAC105 Frequency Modulation
1 400 Hz Nominal Test 400 Hz, +/-5 Hz mod Apply for 10+ mins BSAC105-1
2 395 Hz Nominal Test 395 Hz, +/-5 Hz mod Apply for 10+ mins BSAC105-2
3 405 Hz Nominal Test 405 Hz, +/-5 Hz mod Apply for 10+ mins BSAC105-3
SAC106 Voltage Distortion Spectrum Requires Additional Equipment
SAC107 Total Voltage Distortion Voltage Distortion Factor 0.05 Apply for 30 mins BSAC107
SAC108 DC Voltage Component
1 Positive DC Offset 115V RMS + .10V DC Apply for 30 mins BSAC108-1
2 Negative DC Offset 115V RMS - .10V DC Apply for 30 mins BSAC108-2
SAC109 Normal Voltage Transients 180V RMS to 80V RMS
1 Overvoltage Transients Peak voltage 180V RMS Table SAC109-3 AA-GG BSAC109-1
2 Undervoltage Transients Low voltage 80V RMS Table SAC109-3 HH-LL BSAC109-2
3 Combined Transient 180V RMS to 80V RMS Table SAC109-3 MM BSAC109-3
4 Repetitive Normal Voltage Transient Test 90V RMS to 140V RMS Run transient for 30 mins BSAC109-4
SAC110 Normal Frequency Transients 375 Hz to 425 Hz
1 Overfrequency Transients High Frequency 425 Hz Table SAC110-3 AA-DD BSAC110-1
2 Underfrequency Transients Low Frequency 375 Hz Table SAC110-3 EE-HH BSAC110-2
3 Combined Transient 375 Hz to 425 Hz Table SAC110-3 II BSAC110-3
SAC201 Power Interrupt 0V for 50 msec Table SAC201-2 A-L BSAC201
SAC301 Abnormal Steady State Limits for Voltage and Frequency 100V RMS to 125V RMS, 375 Hz to 425 Hz Apply for 30 mins BSAC301
SAC302 Abnormal Voltage Transients 45V RMS to 180V RMS
1 Overvoltage Transients Peak voltage 180V RMS Table SAC302-3 AA-GG BSAC302-1
2 Undervoltage Transients Low voltage 45V RMS Table SAC302-3 HH-NN BSAC302-2
3 Combined Transient 45V RMS to 180V RMS Table SAC302-3 OO BSAC302-3
SAC303 Abnormal Frequency Transients 320 Hz to 480 Hz Table SAC303-3 AA-EE BSAC303
SAC401 Emergency Steady State Limits for Voltage and Frequency 102V to 124V RMS, 360 to 440 Hz Apply for 30 mins each test BSAC401
SAC501 No Tests N/A to AC Utilization Equipment
SAC601 Power Failure (Single Phase) 0V for 7 seconds Table SAC601-2 A-D BSAC601
SAC602 Power Failure No test, done so numbers coincide