AMETEK Compact i/iX Series Software Manual - Manual (Page 195)

User Manual - Rev H California Instruments
Avionics Software 195
8.4.1 Rev C:
8.4.1.1 Table SVF:
Test No. Section Subject Test Limits Comment File Ref.
SVF101 Steady State Voltage and Frequency 104 to 122 Volts RMS
DO160 16.5.1.1.b, 620Hz and
390Hz
SVF101
SVF102 Voltage Transients Surge to 160Vac max, Sag to 71Vac min
DO160 16.5.1.5.1.b, 620Hz and
390Hz
SVF102
SVF103 Voltage Modulation Vamp = 0.18V to 1.24V, Mrate = 1Hz to 200Hz DO160 16.5.1.2, 620Hz and 390Hz SVF103
SVF104 Voltage Spikes Requires Additional Equipment
SVF105 Current Distortion 115Vnom, 390-620 Hz Limits defined by Table A.4 SVF105
SVF106 Voltage Distortion 10% distortion 30sec each frequency SVF106
SVF106 EW Voltage Distortion - Endurance test with motor 10% distortion Per Table SVF 106-2 SVF106-EW
SVF106 E Voltage Distortion - Endurance test without motor 10% distortion Per Table SVF 106-2 SVF106-E
SVF107 Inrush Current Test requires multiple load cables Test not performed with software
SVF108 Frequency Variations Slew from 390 to 620Hz, 100Hz/s up and down 3 times each SVF108
SVF109 Frequency Modulation
Famp = 4.9 Hz to 0.2Hz, Mrate = 0.014Hz to
100Hz
DO160 16.5.1.3, 620Hz and 390Hz SVF109
SVF110 Voltage DC Content +/-.3VDC Offset 30 mins each test SVF110
SVF111 Voltage Modulation due to Equipment Test requires special cables Test not performed with software
SVF112 Voltage Spike Due to Equipment Load Switching Requires Additional Equipment
SVF201 Abnormal Steady State Voltage and Frequency 96 to 130 Volts RMS
DO160 16.5.2.1.b, 620Hz and
390Hz
SVF201
SVF202 Abnormal Voltage Transients Surge to 180Vac max, Sag to 0Vac min
DO160 16.5.2.2.b, 620Hz and
390Hz
SVF202
SVF203 Abnormal Voltage Modulation Vamp = 0.18V to 1.24V, Mrate = 1Hz to 200Hz DO160 16.5.1.2, 620Hz and 390Hz SVF203
SVF301 Emergency Steady State Voltage and Frequency 104 to 122 Volts RMS
DO160 16.5.1.1.b, 620Hz and
390Hz
SVF301
SVF302 Emergency Voltage Distortion 15% distortion 30sec each frequency SVF302
SVF302 EW Voltage Distortion - Endurance test with motor 15% distortion Per Table SVF 302-2 SVF302-EW
SVF302 E Voltage Distortion - Endurance test without motor 15% distortion Per Table SVF 302-2 SVF302-E
SVF303 Emergency Voltage Distortion Transients 25% distortion 10 times each test SVF303
SVF304 Emergency Frequency Variations Slew from 390 to 620Hz, 500Hz/s up and down 3 times each SVF304
SVF305 Emergency Voltage Modulation due to Equipment Test requires special cables Test not performed with software