AMETEK Compact i/iX Series Software Manual - Manual (Page 114)

User Manual – Rev H California Instruments
114 Avionics Software
Test No. Section Subject Test Limits Comment File Ref.
SXF109 Normal Voltage Transients 152V RMS to 31V RMS
1 Overvoltage Transients Peak voltage 152V RMS Table SXF109-3 A-D FSXF109-1
2 Undervoltage Transients Low voltage 31V RMS Table SXF109-3 E-H FSXF109-2
3 Combined Transient 130V RMS to 70V RMS Table SXF109-3 I FSXF109-3
4 Repetitive Normal Voltage Transient Test 100V RMS to 128V RMS Run transient for 30 mins FSXF109-4
SXF110 Normal Frequency Transients 59 Hz to 61 Hz
1 Overfrequency Transients High Frequency 61 Hz Table SXF110-3 A-B FSXF110-1
2 Underfrequency Transients Low Frequency 59 Hz Table SXF110-3 C-D FSXF110-2
3 Combined Transient 59 Hz to 61 Hz Table SXF110-3 E FSXF110-3
SXF201 Power Interrupt 0V for 50 msec Table SXF201-2 A-L FSXF201
SXF301 Abnormal Steady State Limits for Voltage and Frequency
100V RMS to 128V RMS, 59.5 Hz to 60.5
Hz
Apply for 30 mins FSXF301
SXF302 Abnormal Voltage Transients 50V RMS to 180V RMS
1 Overvoltage Transients Peak voltage 180V RMS Table SXF302-3 A-E FSXF302-1
2 Undervoltage Transients Low voltage 50V RMS Table SXF302-3 F-J FSXF302-2
3 Combined Transient 50V RMS to 180V RMS Table SXF302-3 K FSXF302-3
SXF303 Abnormal Frequency Transients 50 Hz to 61 Hz Table SXF303-3 A-E FSXF303
SXF401 Emergency Steady State Limits for Voltage and Frequency Perform Test SXF102
SXF501 No Tests N/A to AC Utilization Equipment
SXF601 Power Failure (Single Phase) 0V for 2 seconds Table SXF601-2 A-C FSXF601
SXF602 Power Failure No test, done so numbers coincide
SXF603 Phase Reversal Phase reversal done physically FSXF603
5.3.1.6 Table LDC:
Test No. Section Subject Test Limits Comment File Ref.
LDC101 Load Measurements 28V DC FLDC101
LDC102 Steady State Limits for Voltage 22V to 29V DC Apply for 30 mins FLDC102
LDC103 Voltage Distortion Spectrum Requires Additional Equipment
LDC104 Total Ripple Requires Additional Equipment
LDC105 Normal Voltage Transients 18V to 50V DC
1 Overvoltage Transients Peak Voltage 50V DC Table LDC105-3 AA-JJ FLDC105-1
2 Undervoltage Transients Low Voltage 18V DC Table LDC105-3 KK-PP FLDC105-2
3 Combined Transients 18V to 50V DC Table LDC105-3 QQ-RR FLDC105-3
4 Repetitive Normal Voltage Transient Test 18V to 45V DC Repeat transient for 30 mins FLDC105-4
LDC201 Power Interrupt 0V for 50 msec Table LDC201-2 A-L FLDC201
LDC301 Abnormal Steady State Limits for Voltage 20V to 31.5V DC Apply each test for 30 mins FLDC301
LDC302 Abnormal Voltage Transients 7V to 50V DC
1 Overvoltage Transients Peak Voltage 50V DC Table LDC302-4 AAA-FFF FLDC302-1
2 Undervoltage Transients Low Voltage 7V DC Table LDC302-4 GGG-LLL FLDC302-2
3 Combined Transients 7V to 50V DC Table LDC302-4 MMM-NNN FLDC302-3
LDC401 Emergency Limits for Voltage 18V to 29V DC Apply each test for 30 mins FLDC401
LDC501 Starting Voltage Transients 12V to 29V DC Table LDC501-3 AA FLDC501
LDC601 Power Failure 0V for 7 seconds Table LDC601-2 A-D FLDC601