AMETEK Compact i/iX Series Software Manual - Manual (Page 115)

User Manual - Rev H California Instruments
Avionics Software 115
Test No. Section Subject Test Limits Comment File Ref.
LDC602 Polarity Reversal Polarity reversal done physically FLDC602
5.3.1.7 Table HDC:
Test No. Section Subject Test Limits Comment File Ref.
HDC101 Load Measurements 270V DC FHDC101
HDC102 Steady State Limits for Voltage 250V to 280V DC Apply for 30 mins FHDC102
HDC103 Voltage Distortion Spectrum Requires Additional Equipment
HDC104 Total Ripple Requires Additional Equipment
HDC105 Normal Voltage Transients 200V to 330V DC
1 Overvoltage Transients Peak Voltage 330V DC Table HDC105-2 AA-JJ FHDC105-1
2 Undervoltage Transients Low Voltage 200V DC Table HDC105-2 KK-PP FHDC105-2
3 Combined Transients 200V to 330V DC Table HDC105-2 QQ-RR FHDC105-3
4 Repetitive Normal Voltage Transient Test 215V to 315V DC Repeat transient for 30 mins FHDC105-4
HDC201 Power Interrupt 0V for 50 msec Table HDC201-2 A-L FHDC201
HDC301 Abnormal Steady State Limits for Voltage 240V to 290V DC Apply each test for 30 mins FHDC301
HDC302 Abnormal Voltage Transients 180V to 350V DC
1 Overvoltage Transients Peak Voltage 350V DC Table HDC302-4 AAA-FFF FHDC302-1
2 Undervoltage Transients Low Voltage 180V DC Table HDC302-4 GGG-LLL FHDC302-2
3 Combined Transients 180V to 350V DC Table HDC302-4 MMM-NNN FHDC302-3
HDC401 Emergency Limits for Voltage 250V to 280V DC Apply each test for 30 mins FHDC401
HDC501 Starting Voltage Transients 115V to 280V DC Table HDC501-3 AA FHDC501
HDC601 Power Failure 0V for 7 seconds Table HDC601-2 A-D FHDC601
HDC602 Polarity Reversal Polarity reversal done physically FHDC602
5.3.2 Rev E
This test should be performed using the firmware version of the –704 option.
5.3.3 Rev D
This test should be performed using the firmware version of the –704 option.