AMETEK Compact i/iX Series Software Manual - Manual (Page 60)

User Manual – Rev H California Instruments
60 Avionics Software
4.1.3 Lx/Ls –B787 Option Series Limitations
The extent of coverage of the –787 option as implemented on the Lx/Ls Series platform is shown in
the table below. Te sts marked with an „x‟ generally require additional hardware to be used. Tests
marked „N/A‟ are not applicable to the corresponding table. Tests marked with a „  ‟ are covered by
the –787 option. Tests marked with a „P‟ require arbitrary waveform capability, which is available on
Lx models or Ls models with the –ADV option only. Note that some voltage surge tests may require
optional output voltage ranges on the Lx/Ls and may not be supported on the standard voltage range.
DC tests are NOT supported by the Lx/Ls Series
No. Description 115
VAC
235
VAC
No. Description 115 VAC 235 VAC
1.1
Individual Phase
Voltage
  2.2 Voltage Spikes X X
1.2
Average of Three
Phase Voltages
  2.3.1 Frequency Transients  
1.3 Phase Displacement   2.4
Multiple Stroke Power
Interruptions
 
1.4
Phase Voltage
Unbalance
  3.1
Abnormal Individual Phase
Voltage
 
1.5.1 Voltage Modulation   3.2
Abnormal Average of
Three Phase Voltages
 
1.6.1
Total Harmonic
Content
P P 4.1
Abnormal Voltage
Transients
 
1.6.2
Individual Harmonic
Content
X X 4.2.1
Abnormal Frequency
Transients
 
1.6.3 DC Content X X 4.2.2
Abnormal Frequency
Transients
 
1.8 Frequency Modulation
 
4.3 DC Content X X
2.1 Voltage Transients
 
Supp
Supplementary Transient
Tests
 
Table 4-3: -B787 Option Ls/Lx Test Coverage