AMETEK Compact i/iX Series Software Manual - Manual (Page 163)

User Manual - Rev H California Instruments
Avionics Software 163
7.3
–ABD Special Features
7.3.1 Appendix 1: ABD Switching Transients Test Window
Figure 7-1: ABD0100.1.8 Switching Transient Control Window
The ABD0100.1.8 Switching Transients screen provides a high level of control for performing AC or
DC transient tests according to appendix 1 of the ABD0100.1.8. The switching transient tests are also
incorporated in the ABD Table test screen but the parameters for these tests are pre-set by the test
sequence files provided. Using the ABD0100.1.8 Switching Transient control window, transient
parameters can be set interactively and resulting transient timing is displayed graphically.
Both Figure A (Rev D) or Figure 1.1 (Rev E) (Transparency Tests) and Figure B (Rev D) or Figure 1.2
(Rev E) types transients (Transient Tests) can be selected (see figures below) and timing parameter
permutations for Figure B / Figure 1.2 tests are automatically generated and displayed in the transient
permutations table above the time domain display.
Switching Transients conform Figure A (Rev D) or Figure 1.1 (Rev E) (Transparency). Tt is shown in
the T1 column of the table. This transient is repeated 5 times with a delay of 1 second (default)
between transients.