EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 71)

DWDM Passive Component Test System 59
5 Operating the DWDM Passive
Component Test System
Working with Access Levels
The IQS-12004B DWDM Passive Component Test System comprises two
levels of operation: User and Supervisor. The level at which the application
is working is shown in the title bar.
Note: When starting the application, the User level is always the default level of
operation, even if you last exited the application at the Supervisor level.
User Level
At the User level, you can perform complete tests on passive components
and create new database files. However, certain functions are disabled.
To switch from Supervisor level to User level, select Level of Operation,
then User, from the Options menu. A check mark will appear in the menu.
Supervisor Level
The Supervisor level gives you access to all DWDM Passive Component
Test System functions. As a Supervisor you can:
³
Configure the DUTs. For details about this feature, see Configuring DUT
Parameters for Pass/Fail Analysis on page 37.
³
Modify system settings. For details about this feature, see Modifying
System Settings on page 56.
³
Modify ITU channel list. For details about this feature, see Customizing
the Channel List on page 46.
To switch from User level to Supervisor level:
1. From the main widow menu, select Options >Level of Operation >
Supervisor.
2. Enter the requested password. The default password is VISUALIQ.