EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 18)

Introducing the IQS-12004B DWDM Passive Component Test System
6 IQS-12004B
Hardware Components Description
Hardware Components Description
Module Usage
IQS-510P Controller Unit Controls the measurement process as well as data
interpretation and storage. The controller unit is supplied
with the necessary equipment for connection to a local
area network (LAN). For more information, refer to the
IQS-500 Intelligent Test System user guide.
IQS-510E Expansion Units Houses the instruments required by the system. If
necessary, a maximum of nine expansion units may be
connected to the controller unit. For more information,
refer to the IQS-500 Intelligent Test System user guide.
IQS-2600B or IQS-2600CT
Tunable Laser Source
For more information, refer to the IQ-2600 user guide or
IQS-2600B Tunable Laser Source user guide.
IQS-1643 Power Meter Allows DWDM filters and multiplexers characterization.
For more information, refer to the IQS-1600 High-Speed
Power Meter user guide.
IQS-5150 Polarization State
Adjuster (optional)
Allows PDL measurements.
GPIB-controlled switch
(optional)
Allows to use the MultiPath Testing Option to perform
tests on one or many DUTs with a variable number of In
ports and Out ports.