EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 152)

Using the Wavelength Calibration Software
140 IQS-12004B
Initializing the Modules
Initializing the Modules
The following window appears, allowing you to proceed with the
Initialization step.
When the Initialization button is selected, all modules present in the
system will be initialized. Once initialization has been successfully
performed, you will be able to access the next step, Preparing
Calibration.
When the Tools button is selected, only the IQS-9401 WRM will be used.
This step has two functions:
³
To save a copy of the calibration file in the directory of your choice.
³
To replace the current calibration in the IQS-9401 WRM module with a
new one, i.e. the Factory Default or one from a previous calibration
file.