EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 221)

Automating or Remotely Controlling the System
DWDM Passive Component Test System 209
IQS-12004B DWDM Passive Component Test System (Standard) COM Error Messages
ErrInit Unable to initialize a hardware module.
ErrInitBefore Unable to use modules because the module initialization
has not been done. Please initialize modules.
ErrInitPm Unable to initialize the IQS-1600 Power Meter module(s).
ErrInitPsa Unable to initialize the IQS-5150 Polarization State Adjuster
module.
ErrInitSource Unable to initialize theIQS-2600CT source module.
ErrInitStopped Module initialization has stopped.
ErrInitWrm Unable to initialize the IQS-9401 Wavelength Reference
Module.
ErrInprogress Unable to execute another command at this time. Please
wait until the current command is complete.
ErrInvalidIlCurvePolState The IL curve is not available for this polarization state.
ErrMissingCalibration
Parameter
Missing calibration parameter.
ErrMissingDBTemplate The database templates are missing in the specified path.
ErrMissingORLCalibration Missing ORL calibration.
ErrMissingWRCalibration
Missing wavelength reference calibration.
ErrNoHardware Some required modules are not available or not installed.
ErrNotAvailableIn
SimulatorMode
Not available in simulator mode.
ErrNulling Unable to perform a power meter nulling.
ErrNullingIndex Invalid power meter number to perform the nulling.
ErrNullingType Invalid nulling type.
ErrNumberOfAcquisition
Points
Number of acquisition points must be between 1 and
32 000.
Error Number Description