EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 157)

Using the Wavelength Calibration Software
DWDM Passive Component Test System 145
Using Calibration Tools
Using Calibration Tools
There are two ways to access this step:
³
By clicking Tools during the first step.
³
By carrying out the entire process.
³
Apply New: writes the new calibration constants found for the
IQS-9401 WRM module and displays a calibration certificate. For more
information on the calibration certificate, see Viewing and Printing a
Calibration Certificate on page 146. However, if the whole process is
not performed, you will not be able to access the Apply New button
because no calibration constants have been found.
³
Apply Old: Accessible even if the whole calibration process is not
performed. It re-writes calibration constants, by applying an old
calibration file or the Factory Default.
³
Save Current: Accessible even if the whole calibration process is not
performed. It allows you to save the current calibration constants to a
binary file identified with the following format name:
SerialNumber-Date-Hour.dat.