EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 64)

Setting Up the DWDM Passive Component Test System
52 IQS-12004B
Preparing the Test Setup
4. If you need the DWDM Passive Component Test System to perform
successive scans,
4a. Check the box from the Continuous Scan group box.
4b. Enter the number of scans you want to perform in the
corresponding text field.
5. From the Test Selection group box, check the PDL, Simplified PDL
and/or ORL boxes according to the measurements you want to
perform.
6. From the IL Analysis group box, specify the relative power levels (in
dB) at which the bandwidth is calculated (for notch and bandpass
filters).