EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 353)

COM Objects Reference
DWDM Passive Component Test System 341
Switch Interface—Properties
Switch OutPorts
Description This read-only property returns the number of
Out (output) ports of the switch.
Syntax object.OutPorts
Parameters None
Response A Long value
Access Get
Switch Position
Description This property returns or sets a value that determines the active
output port of the switch.
Syntax object.Position = [PortNumber]
If the property is used to set the position, PortNumber is a Long
value that specifies the port number to set as the active output
port. This value must be comprised between 1 and the available
number of Out ports of the switch.
Parameters If this property is used to set the active output port number, use
a Long value.
Response If this property is used to get the active output port number, a
Long value will be returned.
Access Get/Let