EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 27)

DWDM Passive Component Test System 15
2 Safety Information
Laser Safety Information
Safety Information
Your instrument is a Class 1 laser product in compliance with standards
IEC 60825-1 Amendment 2: 2001 and 21 CFR 1040.10. Laser radiation may
be encountered at the output port.
The following label indicates that a product contains a Class 1 source:
Note: Label shown for information purposes only. It is not affixed to your product.
The DWDM Passive Component Test System may be equipped with the
IQS-2600B or the IQS-2600CT tunable laser sources. For more information
on these modules, refer to the IQS-2600B Tunable Laser Source user guide.
W
ARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
W
ARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.
CLASS 1
LASER PRODUCT