EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 59)

Setting Up the DWDM Passive Component Test System
DWDM Passive Component Test System 47
Customizing the Channel List
To modify the ITU channel list display:
1. In the Channel Spacing box, select the space value (in GHz) between
the channels of the DUT.
2. In the Start Wavelength and End Wavelength boxes, enter the values
that will determine the wavelength range that will be displayed on the
list.
3. Confirm your changes with Apply.
To add a new wavelength to the list:
1. Enter the new wavelength in the Wavelength text box. The number of
decimals depends on the value set in the Decimal Places box.
2. Click Add. Your new channel will be added to the list.