EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 209)

Automating or Remotely Controlling the System
DWDM Passive Component Test System 197
SCPI Error Messages
30 Unable to perform an acquisition because the power
at the WRM input is too low. Please check your
connection.
31 Unable to perform an acquisition because the power
for the reference is too low. Please check your
connection.
32 Unable to perform an acquisition because the power
for the calibration is too low. Please check your
connection.
33 The acquisition has stopped.
34 Cannot find simulator data file.
35 An inappropriate number of acquisition channels has
been assigned.
36 Invalid ORL result curve.
37 Unable to determine a sweep span that fits with the
sweep time.
38 Invalid scan range. The acquisition has stopped.
39 Invalid acquisition type. The acquisition has stopped.
40 Power meter synchronization error. The acquisition
has stopped.
41 The command is not supported by the current source
module.
42 Missing calibration parameter.
43 Missing wavelength reference calibration.
44 Missing ORL calibration.
45 The database templates are missing in the path.
46 Invalid power meter value.
47 Invalid power meter value (under range).
Error Number Description