EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 204)

Automating or Remotely Controlling the System
192 IQS-12004B
GPIB Specific Commands—Quick Reference
SOP <0 | 1 | 2 | 3 |> This command indicates on which
SOP to take the IL curve, when a
PDL acquisition has been
performed.
SOP? (0 | 1 | 2 | 3 |) The response to this query indicates
the current SOP when reading the
IL during a PDL acquisition.
PSA MAX -- This command optimizes the
power.
PSA MAX? (0 | 1) The response to this query indicates
if the power has been optimized.
SOP <0 | 1 | 2 | 3 |> This command sets a new
polarization state on the IQS-5150
polarization state adjuster.
SOP? (0 | 1 | 2 | 3 |) The response to this query indicates
the current polarization state of the
IQS-5150 polarization state adjuster.
SOUR MINW? (9999.999) The response to this query indicates
the minimum wavelength (in nm)
of the current source.
MAXW? (9999.999) The response to this query indicates
the maximum wavelength (in nm)
of the current source.
ON <0 | 1> This command turns the source ON
or OFF.
ON? (0 | 1) The response to this query indicates
if the source was active.
STAB? (Time) The response to this query indicates
(in seconds) how long the source
has been turned on.
Command Parameter/Response Description