EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 133)

Testing Multiple DUTs with the LabVIEW Application
DWDM Passive Component Test System 121
Setting Up Device (DUT) Connectivity Configuration
To set up a connectivity configuration:
1. If the DUT Connectivity tab is grayed out, that means no test has been
created since the application was started. To enable the tab, start a
new test. For more information, see Starting a New Test on page 118.
2. With the help of the up/down arrows, select the appropriate number of
switch ports and power meter channels.
3. In the S/N text box, enter the serial number or a description of the
device to be tested.
4. If you want the device to become a reference, click Reference. Once
the definition will be sent to the grid, DUTs having been defined as a
reference will be indicated by a 1.
5. Click Add to transfer the information to the connectivity grid.
Note: You can remove items from the grid by clicking Delete. Rows are deleted
one at a time from the bottom of the grid to the top.
6. Repeat steps 2 to 5 for each DUT that must be added.
Note: When there are no more available switch ports (In) or power meter
channels (Out) i.e. when their number equals zero, you won’t be able to
add anymore DUTs to the connectivity grid.