EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 409)

COM Objects Reference
DWDM Passive Component Test System 397
NotchResult—Properties
NotchResult PdlBw
Description This read-only property returns the maximum PDL value based
on the power level of the parent object. The value is expressed
in dB.
Syntax object.PdlBw
Parameters None
Response A Double value
Note This property allows to retrieve the maximum PDL value over
the bandwidth interval based on the current power level (from
the peak) as specified in the PowerLevel property of the parent
object.
Access Get
NotchResult PdlCw
Description This read-only property returns the PDL value based on the
calculated central wavelength available in the parent object.
The value is expressed in dB.
Syntax object.PdlCw
Parameters None
Response A Double value
Note This property allows to retrieve the PDL value obtained from
analysis at the calculated central wavelength as specified in the
CentralWavelength property of the parent object.
Access Get