EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 307)

COM Objects Reference
DWDM Passive Component Test System 295
Modules Interface—Properties
Modules MinPowerForRef
Description This command indicates the minimum power required to
validate the input of the IQS-1600 power meter modules. This
value is used to verify the connection during the reference
measurement.
Syntax object.MinPowerForRef
Parameters Double
Response Double
Access Get/Let
Note Unit=Watt
Modules MinPowerInWrm
Description This command indicates the minimum power required to
validate the input of the IQS-9401 wavelength reference
module. This value is used to verify the connection.
Syntax object.MinPowerInWrm
Parameters Double
Response Double
Access Get/Let
Note Unit=Watt