EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 203)

Automating or Remotely Controlling the System
DWDM Passive Component Test System 191
GPIB Specific Commands—Quick Reference
READ CURV IL? x(nm), y(dB) This query reads the IL results curve
on a specified channel.
PDL? x(nm), y(dB) This query reads the PDL results
curve on a specified channel.
ORL? x(nm), y(dB) This query reads the ORL results
curve.
ILPD? x(nm), y(dB) The response to this query indicates
the IL curve for a specific SOP, when
a PDL acquisition has been
performed.
SYNC? PowerPoints,Status The response to this query indicates
the power synchronized acquisition
result curve on a specified channel.
CHAN <999> This command sets the active
channel to read curves and the
power meter as well as the channel
localization information.
READ CHAN? (999) The response to this query indicates
the active channel.
CHLO? (Slot position, Power
Meter Channel)
The response to this query indicates
the localization information about
specified channels.
PM? (9999.999) The response to this query indicates
the power meter value (in dBm) for
the specified channel.
WRM? (9999.999,9999.999) The response to this query indicates
the value (in dBm) of the
wavelength reference module.
SN? (ModuleName
SlotPosition: Serial
Number)
The response to this query indicates
the serial number of each module
initialized in the system.
Command Parameter/Response Description