EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 200)

Automating or Remotely Controlling the System
188 IQS-12004B
GPIB Specific Commands—Quick Reference
ARF <0 | 1> This command sets the filtering
mode.
ARF? (0 | 1) The response to this query indicates
the filtering mode.
MINW? (9999.999) The response to this query indicates
the minimum wavelength (in nm)
available in the system.
MAXW? (9999.999) The response to this query indicates
the maximum wavelength (in nm)
available in the system.
STAR <9999.999> This command sets the position (in
nm) where to start the acquisition.
STAR? (9999.999) The response to this query indicates
the position (in nm) where to start
the acquisition.
STOP <9999.999> This command sets the position (in
nm) where to stop the acquisition.
CONF STOP? (9999.999) The response to this query indicates
the position (in nm) where to stop
the acquisition.
CAL WR CHAN <999> This command sets the active
channel for the wavelength
response calibration acquisition.
CHAN? (999) The response to this query indicates
the active channel for the
wavelength response calibration
acquisition.
ACQ -- This command performs a
wavelength response calibration on
the active channel.
Command Parameter/Response Description