EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 164)

Using the Power Meter Linearity Verification Tool
152 IQS-12004B
Connecting the Modules for Linearity Testing
Connecting the Modules for Linearity Testing
With the Power Meter Linearity Verification tool, you can test one or many
power meters. Since verification is performed on one power meter at a
time, the connections remain the same, regardless of the number of
modules to be verified. Only the connections for the device channels will
change.
This tool is associated with the following EXFO’s calibration kits.
³
If you are using IQ modules,
³
If you are using IQS modules,
For more detailed information, please contact EXFO (see Contacting the
Technical Support Group on page 223).
C
AUTION
Never insert or remove a module while the controller or expansion
unit is turned on. This will result in immediate and irreparable
damage to both the module and unit.
IQ-3100
Variable Attenuator
IQ-9600
1x2 Coupler
IQ-1643T
Power Meter
Calibration kit: CKT-10 X X
Calibration kit: CKT-11 X X X
IQS-3100
Variable Attenuator
IQS-9600
1x2 Coupler
IQS-1643T
Power Meter
Calibration kit: CKT-20 X X
Calibration kit: CKT-21 X X X