EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 - Manual (Page 56)

Setting Up the DWDM Passive Component Test System
44 IQS-12004B
Configuring DUT Company/Customer Parameters
³
Operating Wavelength Range: The highest PDL value in the BW1
range is taken.
³
Relative Range (CW)±X nm: allows you to indicate the highest PDL
value in the relative range ± X nm.
³
From X nm to Y nm: allows you to indicate the highest PDL value
between X nm and Y nm.
Click OK to add the DUT to the list of available components to test.
Configuring DUT Company/Customer
Parameters
Note: You must be working at the Supervisor level to access this window.
The Company/Customer Configuration window contains identification
and system information including the name of the company (organization
performing the tests) and the customer (organization for which the tests
are performed).
All this information is saved in a database and is useful for documentation
and traceability purposes.
To access the Company/Customer Configuration window:
From the Configuration menu, select Company/Customer
Configuration.