7264 compact tractor – Cub Cadet 7000 Series User Manual
Page 56

7264 Compact Tractor
19.
DIFFERENTIAL ASSEMBLY:
19.1. Remove all four hex cap lock screws securing
the differential bearing cover to the transmission
housing using a 9/16” socket. See Figure 19.1.
NOTE: Loctite™ the threads and torque them
between 220 and 280 In. Lbs. during assembly.
19.2. Slide the differential assembly to the right. See
Figure 19.2.
19.3. Remove the bearing cover and differential lock
collar from the differential carrier.
NOTE: The ball bearing may or may not be
removed with the bearing cover and differential
lock collar.
19.4. Remove the differential assembly from the trans-
mission housing.
NOTE: Slide a 6” dowel through the differential
lock collar and into the differential assembly to
hold all components in position during assembly.
20.
HYDRAULIC OIL FILTER:
20.1. Place a suitable drain container below the trans-
mission.
20.1. Remove the hydraulic oil filter from the transmis-
sion housing. See Figure 20.1.
NOTE: Install the hydraulic oil filter last during
assembly.
Figure 19.1
Hex Cap Screws
Differential Bearing Cover
Figure 19.2
Bearing Cover
Differential
Assembly
Differential
Lock Collar
Figure 20.1
Hydraulic
Oil Filter
Transmission
Housing
6 - 62