Cub Cadet 7000 Series - Manual (Page 29)

6 - 35
7264 Compact Tractor
25.3. Remove both hex washer head tapp screws
securing the differential pivot bracket to the
frame using 1/2” socket. See Figure 25.3.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs. during assembly.
25.4. Remove the hairpin securing the right and left
brake rod ferrules to the right and left brake
levers using needle nose pliers. See Figure
25.4.
Figure 25.3
Hex Screws
Differential Pivot Bracket
Figure 25.4
Brake Ferrule
Hairpin
Brake Lever
25.5. Remove the hairpin securing the left brake rod to
the left brake link assembly using needle nose
pliers. See Figure 25.5.
25.6. Mark both brake rods.
25.7. Remove both brake control rods from the tractor.
26. DIFFERENTIAL PIVOT ASSEMBLY:
26.1. Remove the chain link securing the differential
pivot link to the differential lock actuator shaft
using a large flat-blade screwdriver. See Figure
26.1.
Figure 25.5
Hairpin
Left Brake Link
Left Brake Rod
Figure 26.1
Chain Link
Differential Pivot Link
Actuator Shaft
6