Cub Cadet 7000 Series - Manual (Page 16)

7264 Compact Tractor
3. PEDALS:
3.1. Remove both hex head tapp screws securing
the forward/reverse pedal to the pedal link
assembly using 1/2” socket. See Figure 3.1.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs. during assembly.
3.2. Remove the forward/reverse pedal.
3.3. Remove both hex head tapp screws securing
the brake pedal to the brake link assembly using
a 1/2” socket. See Figure 3.3.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs. during assembly.
3.4. Remove the brake pedal.
3.5. Remove both hex head tapp screws securing
the differential pedal to the differential shaft
assembly using a 1/2” socket. See Figure 3.5.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs. during assembly.
3.6. Remove the differential pedal.
4. FLOOR PADS:
4.1. Remove the right and left floor pads from the
fender assembly by squeezing the fastener clips
from the bottom and slowly pulling upward on
the floor pad. See Figure 4.1.
Figure 3.1
Hex Screws
Forward/Reverse Pedal
Figure 3.3
Hex Screws
Brake Pedal
Figure 3.5
Differential Pedal
Hex Screws
Differential Shaft
Figure 4.1
Floor Pads
6 - 22