Cub Cadet SLTX1000 Series User Manual
Page 92
LTX Tractors
86
4c.
Remove the pulley. The belt will clear the belt
keepers on top of the transaxle as the pulley
comes up. See Figure 5.72.
5.
Loosen, but do not remove the wheel bolts (Double-
D axles) or lug nuts, using a 1/2” wrench or a 3/4”
wrench, respectively.
6.
Unhook the large return-to-neutral spring from the
back of the tractor frame. Leave the other end con-
nected to the top of the return-to-neutral cam.
See Figure 5.73.
NOTE: There is a second, shorter return-to-neutral
spring that stretches between the cam and
the grooved spacer on the front mounting
bolt of the brake yoke.
7.
Release the parking brake.
8.
Lift, and safely support the tractor. The rear of the
tractor should be high enough to allow the transaxle
to pass under it.
9.
Remove the rear wheels. If the tractor has Double-D
axles, remove the wheel spacers too.
See Figure 5.74.
Figure 5.72
Figure 5.73
Large r-t-n spring
Figure 5.74