Drive belt replacement – Cub Cadet SLTX1000 Series User Manual
Page 81
HYDRO. DRIVE AND BRAKE SYSTEM
75
Drive belt replacement
1. Remove the mowing deck.
2.
Set the park brake to release belt tension.
3.
Remove the battery and battery tray by following the
procedures described in Chapter 4: Body Panels.
See Figure 5.44.
4.
Remove drive belt from the transaxle pulley.
See Figure 5.45.
4a.
Remove the nut using a 3/4” wrench. An impact
wrench with a socket will be most effective.
4b.
Lift-off the cooling fan.
! CAUTION
! CAUTION
The battery will be removed in this procedure. Review the Operator’s Manual and Chapter 7:
Electrical System for important safety information about handling batteries before proceeding.
Figure 5.44
Figure 5.45
Fan nut
This manual is related to the following products: