Gear selector – Cub Cadet SLTX1000 Series User Manual
Page 105

CVT DRIVE AND BRAKE SYSTEM
99
Gear selector
• The forward-neutral-reverse gear selector is on the
left rear fender of the tractor.
• A bracket and spring under the fender keep inward
pressure on the selector to give it positive feel.
See Figure 6.12.
• The selector pivots on a frame-mounted bracket,
transferring the motion to a push-pull rod con-
nected to the transaxle. See Figure 6.13.
• The linkage contacts the reverse safety switch
tang when the tractor is in reverse.
• The linkage is adjustable.
1. To adjust the linkage, put the gear selector in neutral
position.
2.
Confirm that the tractor is in neutral by releasing the
brakes and rolling it back and forth.
3.
Loosen the adjustment bolt using a 1/2” wrench.
See Figure 6.14.
Figure 6.12
Gear selector
Spring
Figure 6.13
Rod
Bracket
Figure 6.14
Adjustment bolt
Reverse safety
switch