Cub Cadet SLTX1000 Series User Manual
Page 220
LTX Tractors
214
6.
Work the belt off of the pulleys.
NOTE: The PTO idler pulley and the timing belt idler
pulley can be moved apart, making clear-
ance to remove the timing belt.
See Figure 8.26.
7.
To install the timing belt turn the blades 90
o
apart.
See Figure 8.27.
NOTE: Failure to time the blades will result in the
blades hitting each other.
NOTE: The timing marks will line up with the blades
and would need to be 90
o
apart.
See Figure 8.28.
NOTE: The timing marks on the blade pulleys have
been shown in white for clarity.
8.
Install the timing belt by following steps 1 through 6
in reverse order.
9.
Test run the tractor in a safe area before returning it
to service.
Figure 8.26
PTO idler pulley
Timing belt idler pulley
¡
Figure 8.27
Figure 8.28
Timing marks