Thermcraft XST-6-0-36-3V - Manual (Page 239)

Installation and Operation Handbook Configuration
2416 Controller 6-7
Name Description Values Meaning
pV Process value config
unit Instrument units 0 C Celsius
0 F Fahrenheit
0 k Kelvin
none Display units blanked
dec.p Decimal places in the nnnn None
displayed value nnn.n
nn.nn
One
Two
rng.L Range low Low range limit. Also setpoint limit for
alarms and programmers
rng.h Range high High range limit. Also setpoint limit for
alarms and programmers
Notes:
1. Pyrometer Emmisivity
Controllers which are specifically supplied for pyrometer inputs (not Exergen K80), have the
curve downloaded in the Custom Input. The parameter,
EmiS, Pyrometer Emmisivity,
appears in the Input List on page 2-15. This parameter is also now correctly adjusted.
2. Range
If a decimal point was configured, negative display and setpoint ranges were limited to -99.9
in previous software versions. The range has been increased to -199.9 by combining the
negative sign with the figure one. This allows Setpoints, Process Variables, Alarm
Setpoints and Programmers to be set to -199.9.