Thermcraft XST-6-0-36-3V - Manual (Page 101)

Installation and Operation Handbook Configuration
2408 and 2404 Controller 6-1
Chapter 6 CONFIGURATION
This chapter consists of six topics:
• SELECTING CONFIGURATION LEVEL
• LEAVING
CONFIGURATION LEVEL
• SELECTING A CONFIGURATION PARAMETER
• CHANGING THE PASSWORDS
• NAVIGATION
DIAGRAM
• CONFIGURATION PARAMETER TABLES.
In configuration level you set up the fundamental characteristics of the controller.
These are:
• The type of control (e.g. reverse or direct acting)
• The Input type and range
• The Setpoint configuration
• The Alarms configuration
• The Programmer configuration
• The Digital input configuration
• The Alarm Relay configuration
• The Communications configuration
• The Modules 1, 2 & 3 configuration
• Calibration
• The Passwords.
WARNING
Configuration is protected by a password and should only be carried out by a qualified
person, authorised to do so. Incorrect configuration could result in damage to the
process being controlled and/or personal injury. It is the responsibility of the person
commissioning the process to ensure that the configuration is correct.