Metrohm 799 GPT Titrino - Manual (Page 105)

2.17 Storing determination results and silo calculations
799 GPT Titrino
101
Starting from the following silo report:
*
*
*
with "match id: off" the following silo calculation report (scalc full) is obtained:
With "match id: id1" the following silo calculation report (scalc full) is obtained:
The short silo calculation report contains only calculations for the current sample.
The mean values of the silo calculations are available for further result calculations as C26
and C27 and can be used in the Titrino in formulas.
Mean value of C24 ⇒ C26
Mean value of C25 ⇒ C27
Important:
• If work is performed with silo calculations, the method name must be entered in the
silo memory.
• Results will be overwritten in the silo recalculation, as long as the silo line is marked
with "/". If you do not wish such an input, e.g. because you work off an urgent sample
between a series, disconnect the silo.
'si
799 GPT Titrino 01102 799.0010
date 2001-09-14 time 08:54 14
>silo
cycle lines: OFF
save lines: ON
sl method id 1/C21 id 2/C22 id 3/C23 C00 C24 C25
+ 1 11-2 A/12 94-09-12 0.233g 0.142ml/min 98.53%
+ 2 0-15 A/13 94-09-12 0.286g 0.9976 NV
+ 3 0-15 A/13 94-09-12 0.197g 0.9947 NV
+ 4 11-2 A/12 94-09-12 0.288g 0.138ml/min 95.75%
/ 5 11-2 A/15 94-09-12 0.263g 0.145ml/min 100.61%
Assignment
for C24 only
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 * * * Rate 0.142ml/min 0.0035 3
Content 98.30% 2.438 3
0-15 * * * Titer 0.9962 0.00205 2 All samples
which have been
processed with
the same me-
thod are combi-
ned
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 A/12 * * Rate 0.140ml/min 0.0028 2
Content 97.14% 1.966 2
0-15 A/13 * * Titer 0.9962 0.00205 2
11-2 A/15 * * Rate 0.145ml/min 0.000 1
Content 100.61% 0.000 1 Sample proc-
essed with the
same method
and having the
same id1 are
combined
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 A/15 * * Rate 0.145ml/min 0.000 1
Content 100.61% 0.000 1