Chapter objectives, General startup precautions, Chapter 4 – Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual User Manual
Page 81: Commissioning your ultra5000, 4 commissioning, Your, Ultra5000, The chapter
1
Publication 2098-IN001E-EN-P — April 2002
Chapter
4
Commissioning Your Ultra5000
Chapter Objectives
This chapter provides you with information to apply power and
configure your Ultra5000. This chapter includes these sections:
• Understanding Communication Switch Settings
• Applying Power To Your System
Before you begin these procedures, be sure to read and understand
the information in the previous chapters of this manual.
Note: The procedures in this chapter do not include information
regarding integration with other products.
General Startup
Precautions
The following precautions pertain to all of the procedures in this
chapter. Be sure to read and thoroughly understand them before
proceeding.
ATTENTION
!
This product contains stored energy devices. To
avoid hazard of electrical shock, verify that all
voltages on the system bus network have been
discharged before attempting to service, repair or
remove this unit.
Only qualified personnel familiar with solid state
control equipment and safety procedures in
publication NFPA 70E or applicable local codes
should attempt this procedure.
Failure to observe this precaution could result in
damage to the equipment or severe bodily injury.