MTS Model FlexTest SE - Manual (Page 23)

Specifications
Models FlexTest® IIm/GT/SE Controller Hardware Introduction 23
Specifications
FlexTest GT Specifications
P ARAMETER S PECIFICATION
Environmental
Temperature
Relative humidity
Altitude
For indoor use only
5ºC–40ºC (41ºF–104ºF)
10%–85%, noncondensing
For use at altitudes up to 2000 m
(6500 ft)
Power input
Input voltage *
Input frequency
Input surge
Power
Insulation over
voltage
Pollution degree
* The specification shown conforms to CE Low Voltage Directive
requirements. The specification allows for 10% of the values stated.
The actual voltage the 493.10 chassis can operate is
90–264 V AC.
power factor corrected universal input
100–240 V AC
47–63 Hz
<100 A
<1000 W
Category II
2
Power supply #1
+5 V DC
±15 V DC
maximum draw is 400 W total
40 A
7.5 A
Power supply #2
±12 V DC
+24 V DC
maximum draw is 400 W total
4 A
10 A
Weight approximately 45 kg (100 lb) in stand
alone configuration