MTS Model FlexTest SE - Manual (Page 213)

Cabling and Using External Readout Devices
Models FlexTest® IIm/GT/SE Controller Hardware FlexTest IIm Controller Connections 213
Cabling and Using External Readout Devices
Cabled appropriately, your FlexTest controller can send station signals to external
readout devices such as oscilloscopes and digital-volt-meters. You define which
signal is sent to the readout device with the Adjust Readouts window.
For a diagram and description of signals available to the station, refer to “Station
signal descriptions” on page 169.
How to Send Signals to External Readout Devices
To send station signals to an external readout device, you must:
1. “Cable your controller to the readout device.” on page 214.
2. “Create a readout channel with Station Builder.” on page 215.
3. “Adjust the readout signal in Station Manager.” on page 215.