Lenze EY System cables and system connectors - Manual (Page 75)

How to select your system cable
Digital frequency cables
Controller type
4
l
75 EDSYPFLD EN 8.0
4.4.2 Controller type
The table shows the controller interfaces and the structure and cross−section of the digital
frequency cable.
9300 vector, X10 3 (2 x 0.14 + (3 x 0.14) X9 X9 X9 X8
[mm ] 2 9300 9400 ECS Master 9300vector 8200vector EMF2132IB
1 2
3 4 5
0
 ‚ ƒ
hb_tab_10
0 Controller (master)
1 Digital frequency cable
2 Controller (slave)
3 Interface on the controller (master)
4 Structure and cross−section of the digital frequency cable
5 Interfaces on the controllers (slave)
ƒ The
 column describes which interface of the controller (master) is to be connected
to the controllers (slave).
ƒ The ‚ column gives more detailed information about the digital frequency cable:
– Here, the symbol stands for the connection cable. The digital frequency cables do
not have any extension cables. The exact product key of this digital frequency
cable can be seen from the following table.
– The digital frequency cables are shielded multi−core cables with the parentheses
representing the shield.
ƒ The
ƒ column contains the interfaces of the controllers (slave).
– The digital frequency cable is applied to the specified interfaces of the different
controllers.