Lenze EY System cables and system connectors - Manual (Page 64)

How to select your system cable
Blower cables
How to find your blower cable
4
l
64 EDSYPFLD EN 8.0
4.2 Blower cables
For your convenience, choose your customised blower cable using a maximum of three
tables. The structure of the tables always provides for the same order in which the
components appear (’motor with blower − blower cable − control cabinet’).
4.2.1 How to find your blower cable
1. Use the bookmarklets of the PDF document to select the motor series in the chapter
"Selection of blower cables".
2. Navigate to the corresponding chapter "Fan with plug connection" or "Fan with
terminal box".
– Structure of the "Blower type" selection table: (
¶ 65)
3. Select a connection cable or a combination of connection cable and extension cable.
– Structure of the "Connection cable" selection table: (
¶ 66)
– Structure of the "Extension cable" selection table: (
¶ 67)
4. Determine the product key of the connection cable or the extension cable,
respectively.
– The product key gives information about the cross−section, the laying system, and
the design of the cable ends.
– The product key also is the order designation.